Creality 3D K2 Plus 3D Printer CREALITY-K2PLUS

350mm Cubed Volume. So Extraordinary

Vexed that your model easily outsizes the build plate? K2 Plus packs a substantial350 x 350 x 350mmbuild volume. This plus format enables larger objects or larger batches, easily satisfying your ever-expanding 3D printing aspirations.

Print out of the Box

K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests such as leveling and fan calibration. Just walk away for a cup of coffee. Things will be ready on their own.

Dual Z-axis Assisted by 4 Linear Rods

Extremely steady while carrying the print bed up and down. Virtually no layer shift.

Incredibly Quiet While Printing Hard

The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.

Blazing Speed, a New Record

For a large-format machine, 600mm/s is pretty fast, but thats not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s.

Air Purifier

Great for filtering VOCs arising from molten filaments.

Built-in RFID Tag Reader

Convenient to handle side-mounted RFID filament.

Ethernet + Dual-band Wifi

Reliable connection, high speed of data transfer.

32G EMMC

Able to store more model files for re-printing.

Toolhead AI Camera Tunes the Flow Rate

There is also an AI camera on the toolhead. It can analyze a test 3D model and then generate an optimal PA value or flow rate percentage value. No more underfeeding and overfeeding that degenerate your prints.

Specifications

Printing Technology: Fused Deposition ModelingProduct: K2 PlusBuild Volume: 350 x 350 x 350mmRated Voltage: 100-240V~ AC 50/60HzK2 Plus Dimensions: 495*515*640mmDisplay Screen: 4.3 color touch screenRated Power: 1200WK2 Plus Net Weight: 35KgSupported Filaments: PLA/ABS/PETG/PA-CF/PLA-CF/PET/ASA/PPA-CFPrinting Speed: 600mm/sAI Camera for Monitoring: StandardAcceleration: 30000mm/sAI Camera for Calibration: StandardPrinting Accuracy: 100mm0.1mmPower Loss Recovery: YesLayer Height: 0.05-0.3mmAuto Filament Relay: YesExtruder: Dual-gear direct drive extruderFilament Tangle Detection: YesFilament Diameter: 1.75mmAir Purifier: YesNozzle Diameter: 0.4mmInput Shaping: YesNozzle Temperature: 350Lighting kit: YesHeatbed Temperature: 120Active Bed Tilt Calibration: YesChamber Temperature: 60Active Belt Tensioning: YesBuild Plate: Flexible build plateActive Chamber Heater: YesLeveling Mode: Full-auto LevelingRFID-tagged Filaments: YesXYZE Motor: Step-servo motorPrintable File Format: Gcode/3MFFile Transfer: USB Drive/Ethernet/WiFiCFS Compatibility: YesFile Storage: 32GB EMMCWifi: 2.4Ghz/5GhzSlicing Software: Creality Print 5.0 or newer versions